Camera SupportLightingLCD MonitorsAccessoriesPower & Cables

 

Items 41 to 60 of 151 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. Hand Grip with 1/4"-20 Male Thread

    Hand Grip with 1/4"-20 Male Thread

    $11.00

    The Hand Grip with 1/4"-20 Male Thread allows you to attach a hand grip to your lights and accessories that have a 1/4"-20 female thread.

    Learn More
  2. Cold Shoe to Cold Shoe Adapter

    Cold Shoe to Cold Shoe Adapter

    $7.99

    This adapter has a cold shoe on either side. It's bottom cold shoe has an integrated ¼-20 female thread. 

    Learn More
  3. On-Table Cold Shoe Support

    On-Table Cold Shoe Support

    $9.99

    The On-Table Cold Shoe Support accepts standard cold shoes, offering your lights or accessories a platform to be supported atop a table.

    Learn More
  4. 3-Stud AC Power Adapter

    3-Stud AC Power Adapter

    $69.00

    The 3-Stud Power Adapter attaches onto a 3-Stud Battery Plate. The power adapter plugs into a power socket and allows for a continuous power feed to your 3-stud battery plate.

    The 3-Stud AC Power Adapter is currently not available for customers located in Canada.

    Learn More
  5. F&V V-Mount Battery Adapter System - Kit

    V-Mount Battery System - Kit

    $179.00

    The V-Mount Battery System mounts onto standard 15mm rods and features four (4) female D-tap connections: DC5V, DC8V, DC12V, and DC14.4V Learn More
  6. Volta NP-F Charger

    Volta NP-F Battery Charger

    $19.00

    The Volta NP-F Charger is suited for any version of the Sony NP-F series Li-ion batteries.

     

    Learn More
  7. F&V NP-F550 DV Battery

    Volta NP-F550 LI-Ion Battery

    $19.00

    The Volta NP-F550 7.4V Lithium-Ion Battery will power most F&V on-camera LED lights, monitors, and more.  This high capacity (2800mAh) rechargable Li-Ion battery will mount on all standard Sony NP-F battery plates. Learn More
  8. Junior Clamp

    Junior Clamp

    $30.00

    The Junior Clamp has a mouth opening of 1.75” and can attach to both flat and round tubes. It has two threaded mounting points (1x  ¼”-20 & 1x  3/8”-16) that allows you to attach a variety of accessories such as an F&V Articulating Arm. The Junior Clamp tightens via a metal kip lever. The Junior Clamp has a reinforced rubber lining on the mouth that allows for a no-slip grip. This clip is strong yet small in size and is easily stored in the pocket of your kit bag or clothing.

    Learn More
  9. Super Clamp

    Super Clamp

    $19.99

    The Super Clamp is heavy-duty yet light weight, and it can be used in a variety of situations. Commonly it is used in a studio setting, allowing you to hang your light on an over head grid. The Super Clamp can also be used to mount your light or accessories on a pole, pipe, or stand. The Super Clamp will work on a tube diameter up to 2 1/4".

    The Super Clamp can also be used on flat surfaces, such as shelvs, table edges, and doors. An additional wedge adapter fills in the gap that allows the Super Clamp to wrap around circular objects. With the wedge filled, the mouth of the Super Clamp is flat.

    The Super Clamp has a rubberized mouth to allow for enhanced friction to securely hold your fixture in place. It also comes with a reversible 5/8" stud / spigot. One side of the stud has a 1/4"-20 male thread and the other side has a 5/8"-16 male thread. This can be used to mount additional lights and accessories such as a smaller F&V On-Camera LED Light with an articulating F&V Junior Joint Pro Ball Head.

    Learn More
  10. Articulating Baby Plate

    Articulating Baby Plate

    $49.99

    The Articulating Baby Plate is a great option for mounting light fixtures to a wall, apple box, or any variety of flat surfaces. The Baby Plate is made from Aluminum Alloy and has a 5/8" male stud which is a standard fitting for small to medium sized lights. The Baby Plate has pre-drilled holes on the plate to allow for screwing or nailing of the plate to a surface.

    Unique to this Baby Plate is a ball joint that allows the 5/8" stud to swivel on axis. With a wide range of motion, you can perfectly position your light.

    Learn More
  11. NP-F to V-mount Adapter w/ Batteries Kit

    NP-F to V-mount Adapter w/ Batteries Kit

    $143.99

    Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try our NP-F to V-mount Adapter. Utilizing the power of 2x NP-F batteries in series, these adapters allow you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel on the market. Learn More
  12. NP-F to 3-Stud (AB Gold Mount) Adapter w/ Batteries Kit

    NP-F to 3-Stud (AB Gold Mount) Adapter w/ Batteries Kit

    $143.99

    Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try our NP-F to 3-Stud Adapter. Utilizing the power of 2x NP-F batteries in series, these adapters allow you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel on the market. Learn More
  13. Volta NP-F770 Li-ion Battery Kit

    Volta NP-F770 Li-ion Battery Kit

    $89.00

    The Volta NP-F770 7.4V Lithium-Ion Battery will power most F&V on-camera LED lights, monitors, and more.  This high capacity (5400mAh) rechargable Li-Ion battery will mount on all standard Sony NP-F battery plates.

    Learn More
  14. Swivel Umbrella Adapter

    Swivel Umbrella Adapter

    $29.95

    The Umbrella Adapter will fit on most light stands and allow for customizable angles while shooting with umbrella. Learn More
  15. Junior Clamp w/ T-bar

    Junior Clamp w/ T-bar

    $30.00

    The Junior Clamp w/T-bar has a mouth opening of 1.75” and can attach to both flat and round tubes. It has two threaded mounting points (1x  ¼”-20 & 1x  3/8”-16) that allows you to attach a variety of accessories such as an F&V Articulating Arm. The Junior Clamp w/T-bar tightens via a metal T-bar. The Junior Clamp w/T-bar has a reinforced rubber lining on the mouth that allows for a no-slip grip. This clamp is strong yet small in size and is easily stored in the pocket of your kit bag or clothing.

    Learn More
  16. Milk Diffusion Filter for Z720/R720 LED Ring Light

    Milk Diffusion Filter for Z720/R720 LED Ring Light

    $45.00

    The Milk Diffusion Filter for Z720/R720 softens the beam of your light creating a beautiful, wrapping light. Learn More
  17. WiFi & Quadrant Control Module for R720 LED Ring Light

    WiFi & Quadrant Control Module for R720 LED Ring Light

    $99.00

    This module lets you control the color temperature and intensity of your R720 LED Ring Light wirelessly with the F&V 2.4 G Wireless Dimmer. It also allows you to control the quadrants of the R720 from the display panel on the light. Learn More
  18. 15mm LWS/19mm Studio Rail Mount for Z720/R720

    15mm LWS/19mm Studio Rail Mount for Z720/R720

    $69.00

    Mount your Z720/R720 LED Ring Light onto any standard 19mm Studio or 15mm Light Weight camera rig with this rail mount. Learn More
  19. F&V Two Light Bracket - Z180

    Two Light Bracket for Z180

    $25.00

    The Two Light Bracket has two (2) ¼"-20 male threads for mounting two (2) Z180 lights side by side.

    Learn More
  20. Volta NP-F770 DV Battery

    Volta NP-F770 DV Battery

    $35.00

    The Volta NP-F770 7.4V Lithium-Ion Battery will power most F&V on-camera LED lights, monitors, and more. This high capacity (5400mAh) rechargable Li-Ion battery will mount on all standard Sony NP-F battery plates.

    Learn More

Items 41 to 60 of 151 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction