Intensifier for more brightness
The KS-1 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-1 increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Quick and easy setup
There is no complicated set-up with your KS-1. Just unfold the KS-1, and attach it to your light with two velcro straps.
The KS-1 Soft Box can be adjusted to fit a wide variety of 1x1 panels from different manufacturers.
Two diffusion stages
Two diffusion stages allow for soft, even illumination across the face of the KS-1. Use one diffusion stage or both in order to adjust the softness and brightness of your light.
Grid for directional control
The KS-1 Soft Box includes a grid for directional control of your light. The grid attaches easily to the KS-1 via velcro.
Nominal Dimensions of Soft Box Face: 19" x 19" (48 x 48cm)
Nominal Min. Dimensions of Soft Mounting Area: 9.25" x 9.25" (23.5 x 23.5cm)
Nominal Max. Dimensions of Soft Mounting Area: 12.50" x 12.50" (31.75 x 31.75cm)
Nominal Soft Box Length from Face of Light: 13" x 13" (3 x 3cm)
Est. Light Increase without Diffusors: 1/3 stop
Est. Light Loss with Close Diffusor: 1 stop (relative to increased brightness of light due to intensifier)
Est. Light Loss with Far Diffusor: 1 stops (relative to increased brightness of light due to intensifier)
Est. Light Loss with Close and Far Diffusor: 2 stops (relative to increased brightness of light due to intensifier)
(1) x KS-1 Soft Box & Intensified
(1) x Grid
(1) x Carry Bag