Base Plate System w/ Dovetail:
The Fidea's base plate system has a quick release plate with a 1/4"-20 thread screw. The base plate mount has several threading options. The baseplate system accepts 15mm rods.
The Matte Box Pro is a 2-stage, swing-away matte box. The swing-away feature of the matte box allows for quick access to your camera's lens; no need to slide your matte box off the rails to swap out a lens. The matte box also has two rotatable filter trays, and comes with 8 lens donuts to insure proper shading on your filters.
Hand Grips and Top Handle:
The Fidea's hand grips, top handle, and shoulder pad can snap-on to any 15mm rod system. The hand grips are adjustable in two locations allowing for comfortable positioning. The top handle can be adjusted in height, and the handle can be unscrewed and threaded on the opposite side. The hand grips feature four 1/4"-20 female thread-ins and the top handle features twenty-two 1/4"-20 female thread-ins. The thread-ins on the the hand grips allow for optimal placement of an on board monitor for the camera operator, and the thread-ins on the top handle allow for excellent placement of an on board monitor for a 1st AC.
V-mount Battery System:
The v-mount battery system features four (4) D-tap connections ranging from DC8V to DC14V. It also has 1 HDMI input that splits into 2 HDMI outputs. This battery system also comes with three "28" D-Tap Male to DCΦ25 Connectors" allowing you to power F&V on board accessories such as the F1 7" monitor or many of the on-camera LED lights.
Follow Focus II Basic:
The Follow Focus II features snap-on rail mounts, a reversible gear box, and the position of the drive gear can be adjusted laterally. With a reversible gear box, the FF basic can be adjusted to accommodate both short and long lenses. Also, its drive gear can be detached and replaced with larger diameter gears.
-Rugged Aluminum Alloy Build
-Base Plate System w/ Tripod Platform
-2-Stage Swing-away Matte Box
-V-mount Battery Plate
-Snap-on Follow Focus II w/ Reversible Drive Gear
-Snap-on Hand Grips, Top Handle, and Shoulder Pad
-Carbon Fiber Rods
Made from Aluminum Alloy
Standard 15mm Rod Set-up
Carbon Fiber Rods
(1) x Base plate with Tripod Platform
(1) x Handle with Support Arm
(1) x Adjustable Hand Grips
(1) x Follow Focus II
(1) x Matte Box Standard
(1) x Shoulder Pad
(1) x V-Mount Battery System
(1) x Link4 Riser - 60mm Spacing
(2) x 30.5cm - 15mm Carbon Fiber Rods
(2) x 46cm - 15mm Carbon Fider Rods